INSTALLATION NOTES for OpenBSD/vax 2.8 What is OpenBSD? ---------------- OpenBSD is a fully functional, multi-platform UN*X-like Operating System based on Berkeley Networking Release 2 (Net/2) and 4.4BSD-Lite. There are several operating systems in this family, but OpenBSD differentiates itself by putting security and correctness first. The OpenBSD team strives to achieve what is called 'a secure by default' status. This means that an OpenBSD user should feel safe that their newly installed machine will not be compromised. This 'secure by default' goal is achieved by taking a proactive stance on security. Since security flaws are essentially mistakes in design or implement- ation, the OpenBSD team puts as much importance on finding and fixing existing design flaws and implementation bugs as it does writing new code. This means that an OpenBSD system will not only be more secure, but it will be more stable. The source code for all critical system components has been checked for remote-access, local-access, denial- of-service, data destruction, and information-gathering problems. In addition to bug fixing, OpenBSD has integrated strong cryptography into the base system. A fully functional IPSEC implementation is provided as well as support for common protocols such as SSL and SSH. Network filtering and monitoring tools such as ipf, ipnat, and bridging are also standard. For high performance demands, support for hardware cryptography has also been added to the base system. Because security is often seen as a tradeoff with usability, OpenBSD provides as many security options as possible to allow the user to enjoy secure computing without feeling burdened by it. Though security is the primary goal, OpenBSD continues the multi- platform tradition. Ports to mvme68k, powerpc and arc machines have been added to the system. To further this work, kernel interfaces have continued to be refined and several subsystems and device drivers are shared in a machine independent fashion among the different ports. You can look for this trend to continue as newer architectures become available. To integrate more smoothly in other environments, OpenBSD 2.8 has significantly enhanced the binary emulation subsystem (which includes iBCS2, Linux, OSF/1, SunOS, SVR4, Solaris, and Ultrix compatibility) and several kernel subsystems have been generalized to support this more readily. The binary emulation strategy is aimed at making the emulation as accurate as possible so that it is transparent to the user. Many new user programs have been added in OpenBSD 2.8, as well, bringing it closer to our goal of supplying a complete and modern UN*X-like environment. Tools like perl and ksh are standard, as are numerous other useful tools. Because OpenBSD is from Canada, the export of Cryptography pieces (such as SSH, IPSEC, and kerberosIV) to the world is not restricted. (NOTE: OpenBSD can not be re-exported from the US once it has entered the US. Because of this, take care NOT to get the distribution from an FTP server in the US if you are outside of Canada and the US.) OpenBSD/vax 2.8 is a new port. 2.8 represents its first release for this reason it is still quite "rough". Development is ongoing, and support for a greater variety of hardware as well as new features is in the works. Sources of OpenBSD: ------------------- This is a list of currently known ftp servers: Australia: ftp://ftp.aba.net.au/pub/OpenBSD == ftp://ftp.au.openbsd.org/pub/OpenBSD ftp://ftp.wiretapped.net/pub/OpenBSD/ ftp://ftp.it.net.au/mirrors/OpenBSD Austria: ftp://gd.tuwien.ac.at/opsys/OpenBSD Canada: ftp://openbsd.sunsite.ualberta.ca/pub/OpenBSD == ftp://ftp.openbsd.org/pub/OpenBSD ftp://ftp.ca.openbsd.org/pub/OpenBSD ftp://ftp1.ca.openbsd.org/pub/OpenBSD France: ftp://ftp.lip6.fr/pub/OpenBSD == ftp://ftp.fr.openbsd.org/pub/OpenBSD ftp://ftp.bsdfr.org/pub/OpenBSD Germany: ftp://ftp.fu-berlin.de/unix/OpenBSD == ftp://ftp.de.openbsd.org/unix/OpenBSD ftp://ftp.gigabell.net/pub/OpenBSD Greece: ftp://filoktitis.noc.uoa.gr/pub/OpenBSD ftp://ftp.duth.gr/pub/OpenBSD Japan: ftp://ftp.dti.ad.jp/pub/OpenBSD == ftp://ftp.jp.openbsd.org/OpenBSD ftp://ftp.kddlabs.co.jp/OpenBSD ftp://ftp.netlab.is.tsukuba.ac.jp/pub/os/OpenBSD Korea: ftp://ftp.snu.ac.kr/pub/BSD/OpenBSD/ Norway: ftp://ftp.inet.no/pub/OpenBSD Russia: ftp://ftp.chg.ru/pub/OpenBSD ftp://ftp.radio-msu.net/pub/OpenBSD Sweden: ftp://ftp.stacken.kth.se/pub/OpenBSD == ftp://ftp.se.openbsd.org/pub/OpenBSD ftp://ftp1.se.openbsd.org/pub/OpenBSD ftp://ftp.sunet.se/pub/OpenBSD Switzerland: ftp://sunsite.cnlab-switch.ch/pub/OpenBSD Taiwan: ftp://openbsd.csie.nctu.edu.tw/pub/OpenBSD Thailand: ftp://ftp.kmitl.ac.th/pub/OpenBSD United Kingdom: ftp://ftp.knowledge.com/pub/mirrors/OpenBSD ftp://ftp.plig.org/pub/OpenBSD USA: ftp://anonopenbsd.cs.colorado.edu/pub/OpenBSD == ftp://ftp.usa.openbsd.org/pub/OpenBSD ftp://ftp3.usa.openbsd.org/pub/OpenBSD ftp://ftp6.usa.openbsd.org/pub/OpenBSD ftp://ftp.eecs.umich.edu/pub/OpenBSD == ftp://ftp1.usa.openbsd.org/pub/OpenBSD ftp://ftp4.usa.openbsd.org/pub/OpenBSD ftp://ftp.op.net/pub/OpenBSD ftp://download.sourceforge.net/pub/mirrors/OpenBSD ftp://ftp.cerias.purdue.edu/pub/os/OpenBSD ftp://ftp.compsci.lyon.edu/pub/distributions/OpenBSD ftp://ftp.op.net/pub/OpenBSD ftp://ftp.src.uchicago.edu/pub/openbsd ftp://rt.fm/pub/OpenBSD As well, the file ftp://ftp.openbsd.org/pub/OpenBSD/2.8/ftplist contains a list which is continually updated. If you wish to become a distribution site for OpenBSD, contact deraadt@cvs.openbsd.org. OpenBSD 2.8 Release Contents: ----------------------------- The OpenBSD 2.8 release is organized in the following way. In the .../2.8 directory, for each of the architectures having an OpenBSD 2.8 binary distribution, there is a sub-directory. The vax-specific portion of the OpenBSD 2.8 release is found in the "vax" subdirectory of the distribution. That subdirectory is laid out as follows: .../2.8/vax/ INSTALL.vax Installation notes; this file. CKSUM Output of the cksum(1) and md5(1) programs MD5 usable for verification of the correctness of downloaded files. bsd A stock GENERIC OpenBSD/vax kernel. bootxx The OpenBSD/vax boot block (for disks and tapes) boot.mop MOP-bootable image (for network installs); see below. *.tgz vax binary distribution sets; see below. The OpenBSD/vax binary distribution sets contain the binaries which comprise the OpenBSD 2.8 release for vax systems. There are ten binary distribution sets. The binary distribution sets can be found in the "vax" subdirectory of the OpenBSD 2.8 distribution tree, and are as follows: base28 The OpenBSD/vax 2.8 base binary distribution. You MUST install this distribution set. It contains the base OpenBSD utilities that are necessary for the system to run and be minimally functional. It includes shared library support, and excludes everything described below. comp28 The OpenBSD/vax Compiler tools. All of the tools relating to C, C++, and FORTRAN (yes, there are two!) are supported. This set includes the system include files (/usr/include), the linker, the compiler tool chain, and the various system libraries (except the shared libraries, which are included as part of the base set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. etc28 This distribution set contains the system configuration files that reside in /etc and in several other places. This set MUST be installed if you are installing the system from scratch, but should NOT be used if you are upgrading. (If you are upgrading, it's recommended that you get a copy of this set and CAREFULLY upgrade your configuration files by hand.) game28 This set includes the games and their manual pages. man28 This set includes all of the manual pages for the binaries and other software contained in the base set. Note that it does not include any of the manual pages that are included in the other sets. misc28 This set includes the system dictionaries (which are rather large), the typesettable document set, and man pages for other architectures which happen to be installed from the source tree by default. OpenBSD System Requirements and Supported Devices: -------------------------------------------------- OpenBSD/vax 2.8 runs on the following classes of machines (machines in parentheses have been tested): - KA410-based (VAXstation/MicroVAX 2000) - KA42/KA420-based (VAXstation 3100/{30,40}) - KA43/KA430-based (VAXstation 3100/76) - KA46-based (VAXstation 4000/60) - some KA670 vaxen (VAX 4000/300) - some KA640 vaxen (MicroVAX 3300/3400) Ethernet devices: - on-board MicroVAX or VAXstation LANCE - DEC SGEC SCSI: - on-board NCR 5380 (VS3100) - on-board NCR 53C9x (VS4000/60) Serial ports: - DZ*11 lines (also DZ*11 compatible lines on VAXstations) The lowest amount of memory tested is 6M; however, more is recommended. At the moment, the only supported console is a serial console. Currently, your only storage options for using OpenBSD/vax are SCSI disks or tapes on one of the supported controllers, or a NFS root and swap. Please see below for details. Getting the OpenBSD System onto Useful Media: --------------------------------------------- Installation is supported from several media types, including: FFS partitions Remote NFS partition FTP HTTP To install or upgrade OpenBSD using a remote partition, mounted via NFS, you must do the following: NOTE: This method of installation is recommended only for those already familiar with using BSD network configuration and management commands. If you aren't, this documentation should help, but is not intended to be all-encompassing. Place the OpenBSD distribution sets you wish to install into a directory on an NFS server, and make that directory mountable by the machine on which you are installing or upgrading OpenBSD. This will probably require modifying the /etc/exports file on of the NFS server and resetting its mount daemon (mountd). (Both of these actions will probably require superuser privileges on the server.) You need to know the the numeric IP address of the NFS server, and, if the server is not on a network directly connected to the machine on which you're installing or upgrading OpenBSD, you need to know the numeric IP address of the router closest to the OpenBSD machine. Finally, you need to know the numeric IP address of the OpenBSD machine itself. Once the NFS server is set up properly and you have the information mentioned above, you can proceed to the next step in the installation or upgrade process. If you're installing OpenBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. If you are upgrading OpenBSD, you also have the option of installing OpenBSD by putting the new distribution sets somewhere in your existing file system, and using them from there. To do that, you must do the following: Place the distribution sets you wish to upgrade somewhere in your current file system tree. At a bare minimum, you must upgrade the "base" binary distribution, and so must put the "base28" set somewhere in your file system. If you wish, you can do the other sets, as well, but you should NOT upgrade the "etc" distribution; the "etc" distribution contains system configuration files that you should review and update by hand. Once you have done this, you can proceed to the next step in the upgrade process, actually upgrading your system. Preparing your System for OpenBSD Installation: ----------------------------------------------- Installing the OpenBSD System: ------------------------------ Installing OpenBSD is a relatively complex process, but if you have this document in hand and are careful to read and remember the information which is presented to you by the install program, it shouldn't be too much trouble. Before you begin, you should know the geometry of your hard disk, i.e. the sector size (note that sector sizes other than 512 bytes are not currently supported), the number of sectors per track, the number of tracks per cylinder (also known as the number of heads), and the number of cylinders on the disk. The OpenBSD kernel will try to discover these parameters on its own, and if it can it will print them at boot time. If possible, you should use the parameters it prints. (You might not be able to because you're sharing your disk with another operating system, or because your disk is old enough that the kernel can't figure out its geometry.) At the moment, the only way to install OpenBSD/vax is via diskless booting over an Ethernet network. You will need both the "boot.mop" image and the "bsd.rd" kernel to boot. You will also need a machine configured as a rarp, MOP, bootparam, and NFS server. This document will give a few examples on how to set up each of these services on an OpenBSD machine; if this is not enough information, check out the OpenBSD manpages for rarpd(8), mopd(8), rpc.bootparamd(8), bootparams(5), nfsd(8), mountd(8), and diskless(8). Also, Brian Chase has written a guide for booting a VAX off of a network; this was written for NetBSD/vax, but the procedure is virtually identical for OpenBSD/vax, and the document covers the use of several different platforms as servers. The guide is available at: http://world.std.com/~bdc/projects/vaxen/VAX-netboot-HOWTO If this is your first time installing over a network it is STRONGLY suggested you read this guide. Configuring the Server: --------------------- When you turn on your VAX, it will run a set of self-diagnostic ROM routines. Depending on the model of VAX you have, it may take quite a while. When it is done, you will see a >>> prompt (also called the chevron prompt) on the console. Typing "show dev" or "show ethernet" to get the VAX ethernet device's MAC address usually works; also try "TEST 50" on MicroVAXen 2000 and 3100. You will need to create an /etc/ethers file. This file is used by rarpd to answer rarp (ethernet address->IP address) requests. The format of this file is the ethernet address followed by the machine name or address. Here is an example: 08:00:2b:24:72:00 quickvax Then start rarpd (or configure /etc/rc.conf to always start rarpd). Copy boot.mop into /tftpboot/mop/1a2b3c4d5e6f.SYS, where "1a2b3c4d5e6f" represents the six octets of your ethernet address. For example, the filename for the machine described above would be "08002b247200.SYS". Note that all non alphanumeric characters must be stripped and the mac portion must be lower case, the extension upper. Start mopd by typing "mopd -a". rpc.bootparamd's configuration file is /etc/bootparams. The format for this file is described in the diskless(8) and bootparams(5) manpages. Enable rpc.bootparamd in /etc/rc.conf by changing the value of "bootparamd_flags". Also, make sure "portmap" is "YES"; you will need portmap running. nfsd and mountd configuration are described in their respective manual pages. Make a separate directory for your VAX's /, make sure it is exported via NFS, and place "bsd.rd" there. Typing "B ", where is your VAX's ethernet device, at the chevron prompt should then load the OpenBSD booter. A countdown should begin; type any key on the console and type "boot bsd.rd". Once the kernel has loaded, you will be presented with the OpenBSD kernel boot messages. You will want to read them to determine your disk's name and geometry. Its name will be something like "sd0" or "wd0" and the geometry will be printed on a line that begins with its name. As mentioned above, you will need your disk's geometry when creating OpenBSD partitions. You will also need to know the device name to tell the install tools what disk to install on. If you cannot read the messages as they scroll by, do not worry -- you can get at this information later inside the install program. You should now be ready to install OpenBSD. The following is a walk-through of the steps you will take while getting OpenBSD installed on your hard disk. If any question has a default answer, it will be displayed in brackets ("[]") after the question. If you wish to stop the installation, you may hit Control-C at any time, but if you do, you'll have to begin the installation process again from scratch. To install via FTP: To begin an FTP install you will need the following pieces of information. Don't be daunted by this list; the defaults are sufficient for most people. 1) Proxy server URL if you are using a URL-based ftp proxy (squid, CERN ftp, Apache 1.2 or higher). You need to define a proxy if you are behind a firewall that blocks outgoing ftp (assuming you have a proxy available to use). 2) Do you need to use active mode ftp? By default, ftp will attempt to use passive mode and fall back to an active connection if the server does not support passive mode. You only need to enable this option if you are connecting to a buggy ftp daemon that implements passive ftp incorrectly. Note that you will not be asked about active ftp if you are using a proxy. 3) The IP address (or hostname if you enabled DNS earlier in the install) of an ftp server carrying the OpenBSD 2.8 distribution. If you don't know, just hit return when asked if you want to see a list of such hosts. 4) The ftp directory holding the distribution sets. The default value of pub/OpenBSD/2.8/vax is almost always correct. 5) The login and password for the ftp account. You will only be asked for a password for non-anonymous ftp. For instructions on how to complete the installation via ftp, see the section named "Common URL installations" below. To install from a NFS mounted directory: When installing from a NFS-mounted directory, you must have completed network configuration above, and also set up the exported file system on the NFS server in advance. First you must identify the IP address of the NFS server to load the distribution from, and the file system the server expects you to mount. The install program will also ask whether or not TCP should be used for transport (the default is UDP). Note that TCP only works with newer NFS servers. You will also have to provide the relative path to the directory on the file system where the distribution sets are located. Note that this path should not be prefixed with a '/'. For instructions on how to complete the installation from the CD-ROM distribution, see the section named "Common file system installations" below. Common file system installations: The following instructions are common to installations from local disk partitions, NFS mounted directories and CD-ROMs. A list of available distribution sets will be listed. You may individually select distribution sets to install or enter `all' to install all of the sets (which is what most users will want to do). You may also enter `list' to get a file list or `done' when you are done selecting distribution sets. You may also use wildcards in place of a file name, eg `*.tgz' or even `base*|comp*'. It is also possible to enter an arbitrary filename and have it treated as a file set. Once you have selected the file sets you want to install and entered `done' you will be prompted to verify that you really do want to extract file sets. Assuming you acquiesce, the files will begin to extract. If not, you will be given the option of installing sets via one of the other install methods. Common URL installations: Once you have entered the required information, the install program will fetch a file list and present a list of all the distribution sets that were found in the specified directory. (If no valid sets were found, you will be notified and given the option of unpacking any gzipped tar files found or getting a file list if none were found.) At this point you may individually select distribution sets to install or enter `all' to install all of the sets (which is what most users will want to do). You may also enter `list' to get a file list or `done' when you are done selecting distribution sets. You may also use wildcards in place of a file name, eg `*.tgz' or even `base*|comp*'. It is also possible to enter an arbitrary filename and have it treated as a file set. Once you have selected the file sets you want to install and entered `done' you will be prompted to verify that you really do want to download and install the files. Assuming you acquiesce, the files will begin to download and unpack. If not, you will be given the option of installing sets via one of the other install methods. When all the selected distribution sets has been extracted, you will be allowed to select which time zone your system will be using, all the device nodes needed by the installed system will be created for you and the file systems will be unmounted. For this to work properly, it is expected that you have installed at least the "base28", "etc28", and "bsd" distribution sets. Congratulations, you have successfully installed OpenBSD 2.8. When you reboot into OpenBSD, you should log in as "root" at the login prompt. You should create yourself an account and protect it and the "root" account with good passwords. You should have got a mail from the install program we recommend you to read, it contains answers to basic questions you might have about OpenBSD (like setting up your system, installing packages, getting more information about OpenBSD, sending in your dmesg output and more). This you can do by running mail and then just enter "1" to get the first message. You quit mail by entering "q". Some of the files in the OpenBSD 2.8 distribution might need to be tailored for your site. We recommend you run: man afterboot which will tell you about a bunch of the files needing to be reviewed. If you are unfamiliar with UN*X-like system administration, it's recommended that you buy a book that discusses it. Upgrading a previously-installed OpenBSD System: ------------------------------------------------ To upgrade to OpenBSD 2.8 from a previous version start with the general instructions in the section "Installing OpenBSD". If you are upgrading with the miniroot or the new single floppy image, select the (U)pdate option rather than the (I)nstall option at the prompt in the install process. The upgrade script will use the existing disk partitions to install the new system in, and also preserves files in `/etc' which you are likely to have customized since a previous installation. Getting source code for your OpenBSD System: -------------------------------------------- Now that your OpenBSD system is up and running, you probably want to get access to source code so that you can recompile pieces of the system. A few methods are provided. If you have an OpenBSD CD, the source code is provided. Otherwise, you can get the pieces over the Internet using ANONCVS, CTM or FTP. For more information, see http://www.openbsd.org/anoncvs.html http://www.openbsd.org/ctm.html http://www.openbsd.org/ftp.html Using online OpenBSD documentation: ----------------------------------- Documentation is available if you first install the manual distribution set. Traditionally, the UN*X "man pages" (documentation) are denoted by 'name(section)'. Some examples of this are intro(1), man(1), apropos(1), passwd(1), and passwd(5). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The 'man' command is used to view the documentation on a topic, and is started by entering 'man [section] topic'. The brackets [] around the section should not be entered, but rather indicate that the section is optional. If you don't ask for a particular section, the topic with the least-numbered section name will be displayed. For instance, after logging in, enter man passwd to read the documentation for passwd(1). To view the documentation for passwd(5), enter man 5 passwd instead. If you are unsure of what man page you are looking for, enter apropos subject-word where "subject-word" is your topic of interest; a list of possibly related man pages will be displayed. Adding third party software; ``packages'' and ``ports'': ------------------------------------------------------- As complete as your OpenBSD system is, you may want to add any of several excellent third party software applications. There are several ways to do this. You can: 1) Obtain the source code and build the application based upon whatever installation procedures are provided with the application. 2) Use the OpenBSD ``ports'' collection to automatically get any needed source file, apply any required patches, create the application, and install it for you. 3) Use the OpenBSD ``package'' collection to grab a pre-compiled and tested version of the application for your hardware. If you purchased the OpenBSD CD-ROM you already have several popular ``packages'', and the ``ports'' collection. Instructions for installing applications from the various sources using the different installation methods follow. If emacs is to be installed it should be installed first as it creates the ``info'' directory file that may be modified by other applications. You should also refer to the packages(7) manual page. Installing applications from the CD-ROM package collection: The OpenBSD CD-ROM ships with several applications pre-built for various hardware architectures. The number of applications vary according to available disk space. Check the directory 2.8/packages/vax to see which packages are available for your hardware architecture. That directory will be on the same CD-ROM containing the OS installation files for your architecture. To install one or more of these packages you must 1) become the superuser (root) 2) mount the appropriage CD-ROM 3) use the ``pkg_add'' command to install the software Example (in which we use su(1) to get superuser privileges, thus you have to be in group "wheel", see the manual page for su(1)). $ su Password: # mkdir -p /cdrom # mount /dev/cd0a /cdrom # pkg_add /cdrom/2.8/packages/vax/ # # umount /cdrom Package names are usually the application name and version with .tgz appended, e.g. emacs-20.3.tgz Installing applications from the ftp.openbsd.org package collection: All available packages for your architecture have been placed on ftp.openbsd.org in the directory pub/OpenBSD/2.8/packages/vax/ You may want to peruse this to see what packages are available. The packages are also on the OpenBSD FTP mirror sites. See http://www.openbsd.org/ftp.html for a list of current ftp mirror sites. Installation of a package is very easy. 1) become the superuser (root) 2) use the ``pkg_add'' command to install the software ``pkg_add'' is smart enough to know how to download the software from the OpenBSD ftp server. Example: $ su Password: # pkg_add ftp://ftp.openbsd.org/pub/OpenBSD/2.8/packages/vax/emacs-20.3.tgz Packages available include (at least): ImageMagick-4.2.0.tgz m4-1.4.tgz Xaw3d-1.3.tgz mm-2.7.tgz aalib-1.2.tgz mpeg_lib-1.2.1.tgz afm-1.0.tgz mpeg_play-2.4.tgz autoconf-2.13.tgz netpbm-19940301.tgz bash-2.03.tgz netpipes-4.1.1-export.tgz bison-1.25.tgz nmh-1.0.tgz bzip2-0.9.0c.tgz pgp-2.6.3-intl.tgz compface-1.0.tgz pgp-2.6.3-usa.tgz cucipop-1.31.tgz pine-4.10.tgz dejagnu-1.3.tgz png-1.0.3.tgz egcs-1.1.2.tgz psutils-1.17-a4.tgz emacs-20.3.tgz psutils-1.17-letter.tgz enscript-1.6.1.tgz screen-3.7.6.tgz ethereal-0.5.1.tgz sharutils-4.2.tgz expect-5.28.tgz sniffit-0.3.5.tgz fetchmail-4.7.9.tgz freetype-1.2.tgz gettext-0.10.35.tgz tar-1.12.tgz ghostscript-5.10.tgz tcl-8.0.5.tgz gimp-1.1.4.tgz tcsh-6.08.00.tgz glib-1.2.1.tgz teTeX-0.4.tgz glimpse-4.1.tgz tiff-3.4.tgz gmake-3.77.tgz tk-8.0.5.tgz gnuplot-3.7.tgz transfig-3.2.1.tgz gtk+-1.2.1.tgz unzip-5.40.tgz gv-3.5.8.tgz viewfax-2.3.tgz id-utils-3.2.tgz wget-1.5.3.tgz idled-1.16.tgz xcolors-1.3.tgz iozone-2.01.tgz xfig-3.2.2.tgz ircii-2.8.2-epic3.004.tgz xntp3-5.93e-export.tgz ispell-3.1.20.tgz xpaint-2.5.5.tgz jove-4.16.tgz xpdf-0.80.tgz jpeg-6b.tgz xphoon-91.9.18.tgz lesstif-0.88.0.tgz xspread-2.1.tgz libslang-1.2.2.tgz xv-3.10a.tgz Note: these packages may not exist for all architectures; other packages may be added. Some packages are only available via ftp. Installing applications from the CD-ROM ports collection: The CD-ROM ``ports'' collection is a set of Makefiles, patches, and other files used to control the building and installation of an application from source files. Creating an application from sources can require a lot of disk space, sometimes 50 megabytes or more. The first step is to determine which of your disks has enough room. Once you've made this determination read the file README.ports on CD-ROM 2 to see how to copy or mount the ports directory. To build an application you must: 1) become the superuser (root) 2) have network access, or obtain the actual source files by some other means. 3) cd to the ports directory containing the port you wish to build. To build samba, for example, where you'd previously copied the ports files into the /usr/ports directory: cd /usr/ports/net/samba 4) make 5) make install 6) make clean Installing applications from the OpenBSD ports collection: See http://www.openbsd.org/ports.html for current instructions on obtaining and installing OpenBSD ports. You should also refer to the ports(7) manual page. Installing other applications: If an OpenBSD package or port does not exist for an application you're pretty much on your own. The first thing to do is ask ports@openbsd.org if anyone is working on a port -- there may be one in progress. If no luck there you may try the FreeBSD ports or NetBSD package collection. If you are on an i386 based machine it is quite possible that the FreeBSD port, if one exists, will work for you. If you can't find an existing port try to make your own and feed it back to OpenBSD. That's how our ports collection grows. Some details can be found at http://www.openbsd.org/porting.html with more help coming from the mailing list, ports@openbsd.org. Administrivia: -------------- There are various mailing lists available via the mailing list server at . To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instructions. There are also two OpenBSD Usenet newsgroups, comp.unix.bsd.openbsd.announce for important announcements and comp.unix.bsd.openbsd.misc for general OpenBSD discussion. To report bugs, use the 'sendbug' command shipped with OpenBSD, and fill in as much information about the problem as you can. Good bug reports include lots of details. Additionally, bug reports can be sent by mail to: bugs@OpenBSD.ORG Use of 'sendbug' is encouraged, however, because bugs reported with it are entered into the OpenBSD bugs database, and thus can't slip through the cracks. As a favor, please avoid mailing huge documents or files to the mailing lists. Instead, put the material you would have sent up for FTP somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it.